Handmade: Inferno™ is an efficient, 2.5kw, heavyweight wood burning stove. The flue exits at the back of the stove, enabling it to be fitted through flashing in the SoulPad's 60cm vertical wall.
Inferno™ is made by hand here in the UK by a small forge team. Less portable than our other stoves, but has a real sense of permanence once in place.
Can be used in any of the 4000, 5000 and 6000 series SoulPad tents (not the 5000-tribe as this doesn't have a vertical wall). Not suitable for use in the smaller 3000-series SoulPads
Inferno™ should be used with the Inferno-flue™
Shown here with the Stove Back Plate and the Tray/Hearth from the Inferno-flue™
Leadtime: 2-3 weeks (maybe longer in peak season).
The Inferno™ stove and Inferno-flue™ configuration allow the user to decide on the stoves positioning (to a degree). The entrance must be kept clear for safety reasons, as must the windows.
The stove is sited away from the centre of the SoulPad, closer to the 'wall', with the flue pipe fitted through the vertical canvas via flashing (included in the Inferno-flue kit). The flue is then further supported on the outside of the SoulPad with a Flue Support included in the Inferno-flue kit.
Comes with a neat and discreet device at the back to slot a stove back plate into. One freestanding unit.
The small hearth (as pictured) is part of the Inferno-flue kit.
Vent system allows control of air flow. Combine this with the airtight door and the result is a neat little stove with maximum log burning efficiency.
Top plate generous in size: tbc x tbc mm.
The flue pipe connects at the back (not at the top) so the Inferno™ can't be left in situ if you decide to roll the walls up fully on your SoulPad-lite/hybrid/hybrid-G.
There is a Flue Support included in the Inferno-flue™ kit which can be clamped onto the external pipe and pegged to the ground.
The Inferno™ is plenty to warm even the biggest of SoulPads.
|Firebox Dimensions (hxwxd)||25 x 29 x 25 cm|
|Overall Dimensions (hxwxd)||45 x 38 x 36.5 cm (incl. handle)|
|Overall Dimensions (hxwxd)||45 x 33 x 36.5 cm (excl. handle)|
|Flue Outlet diameter Ø||10.2cm/4"|
|Flue kits compatible with||Inferno-flue™|